العربية

العربية

Get a Quote
منتجات

منتوجات جديدة

أخبار الشركة

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
2023-05-31

يعتقد الكثير من الناس أن كلاً من صمامات البوابة وصمامات الكرة الأرضية لها وظيفة قطع الوسائط ، لذلك لا تختلف عند استخدامها. في الواقع ، هناك اختلافات معينة بين صمامات البوابة وصمامات الكرة الأرضية في التطبيقات العملية. Gate Valve and Structural Diagram Globe Valve and Structural Diagram 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and

تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
2023-05-24

صمام الفراشة ذو الختم الصلب الثلاثي اللامركزي ، كصمام عالي الأداء ، له مزايا مثل مقاومة التآكل ، الختم الموثوق به ، وعزم الدوران الصغير للفتح. سطحه المحكم هو سطح مخروطي مائل ، والاتصال بين حلقة إحكام إغلاق جسم الصمام وحلقة إحكام تجميع لوحة الفراشة هي ملامسة السطح. مبدأ عملها هو قيادة مجموعة لوحة الفراشة مباشرة عن طريق عزم دوران جهاز القيادة ، مما يتسبب في اتصال حلقة الختم الخاصة بمجموعة لوحة الفراشة بشكل كامل بحلقة إحكام إغلاق جسم الصمام وتوليد تشوه مرن للختم. الخصائص الهيكلية 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

صمام الاختيار البديل
加载中...

1 "150LB مزورة الصلب شفة فحص صمام التأرجح API 602 A105

1 "150LB صمام فحص التأرجح مصنوع وفقًا لمعيار API 602. جسم الصمام مصنوع من A105. له الخصائص الهيكلية لغطاء الترباس ، نوع التأرجح والتجويف الكامل. وضع التوصيل هو RF (شفة ملحومة).

  • دفع:

    30% when order confirmed, 70% before shipment
  • أصل المنتج:

    China
  • اللون:

    Customization
  • ميناء الشحن:

    Shanghai, China
  • المهلة:

    30~60 days Ex Works after order confirmation
  • Material:

    A105
الاستفسار الآن
تفاصيل المنتج

وصف المنتج

يكتب

صمام الاختيار البديل

بحجم

1 بوصة

ضغط

150 رطل

اتصال

RF (شفة ملحومة)

مادة الجسم

أ 105

معيار التصميم

API 602

وجها لوجه

ASME B16.10.009

البعد شفة

ASME B16.5

مادة

AISI / AST ،

كود الاختبار والتفتيش

API 598

متوسط ​​قابل للتطبيق

بخار

سمات

1. تم اختبار جميع لحامات الصمام (الغلاف والشفة الطرفية) بواسطة تلوين PT ، وهناك تقرير المصنع ؛

2. مع سترة مصنوعة من SS304 ، البخار في الغلاف هو 204 درجة مئوية.

3. شفة الصمام عبارة عن شفة مكبرة ، الصمام 1 بوصة لديه شفة 2 "150LB.

رسم تقنى _ رسم عن طريق الكمبيوتر

فحص البعد

اختبار الضغط

لوحة الاسم والتعبئة

تقرير التفتيش


اترك رسالة

إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

منتجات ذات صله
بكالوريوس 1868 صمام الاختيار نوع البديل
صمام الاختيار المتأرجح 8 بوصة 1500 رطل WCB بفلنجة BS 1868

يتطابق صمام عدم الرجوع مقاس 8 بوصات مع رمز تصميم BS 1868 ، مع غطاء محرك وغطاء من النوع المتأرجح. صمام الفحص ذو الحواف مصنوع من الفولاذ الكربوني a216 wcb. ميزة التصميم1.bb: بونيه انسحب2. نوع القرص يتأرجح3.تصميم تجويف مخفض4. معدلات تدفق متفوقة5. تقليل فقدان الاحتكاك6. مواد تقليم القياسية للاختيار7.المفصلي الخارجي أو الداخلي متاح عند الطلب8. اسطوانة ووزن العداد متاح عند الطلب 9. الجذعية العارية والمشغلات متوفرة عند الطلب تفاصيل سريعة نوع التحقق من   صمام بحجم 8 " ضغط التصميم ansi   1500 اعمال بناء انسحب   غطاء محرك السيارة ، نوع التأرجح الإتصال رفع   شفة الوجه تصميم & أمبير ؛ صناعة بكالوريوس   1868 من النهاية إلى النهاية اسمى   ب 16.10 الإتصال اسمى   ب 16.5 الضغط & أمبير ؛   مؤقت اسمى   ب 16.34 اختبار & أمبير ؛   تفتيش واجهة برمجة تطبيقات   598 مواد الجسم كربون   صلب درجة الحرارة المطبقة -29 ℃ ~ + 400 ℃ وسائل الإعلام w.o.g. البعد الفئة 1500 NPS في 2 2 1/2 3 4 6 8 10 12 د مم 50 65 80 100 150 200 250 300 L-L1(rf-bw) في 14-1 / 2 16-1 / 2 18-1 / 2 21-1 / 2 27-3 / 4 32-3 / 4 39 44-1 / 2 مم 368 419 470 546 705 832 991 1130 ل 2(رتج) في 14-5 / 8 16-5 / 8 18-5 / 8 21-5 / 8 28 33-1 / 8 39-3 / 8 45-1 / 8 مم 371 422 473 549 700 841 1000 1146 ح(افتح) في 12-1 / 4 12-1 / 4 13 14 15-3 / 4 20-7 / 8 22-1 / 16 25-5 / 8 مم 310 310 330 355 400 530 560 650 بالوزن(كلغ) الترددات اللاسلكية 69 93 140 232 490 990 1490 1970 من وزن الجسم 49 74 111 185 375 803 1250 1625

مزدوج نوع شفة صمام تأرجح نوع
نوع التأرجح صمام عدم الرجوع dn150 pn40 rf flange 1.0619

صمام الاختيار من نوع التأرجح ، المصمم بشفة pn40 rf ، غطاء مثبت ، مصنوع من الفولاذ المصبوب 1.0619 ومادة ss316. يمكن تصنيع صمام الاختيار الكامل لكل طلبات العميل الخاصة. تفاصيل سريعة نوع عدم   صمام الرجوع (فحص الصمام) الحجم الاسمي د   150 الضغط الاسمي ص   40 اعمال بناء ب ،   قرص نوع التأرجح ، دبوس خارجي الإتصال رفع   شفة الوجه تصميم & أمبير ؛ صناعة الدين   3356 من النهاية إلى النهاية en   558 الإتصال en   1092 اختبار & أمبير ؛   تفتيش en   12266 مواد الجسم GS-C25   (1.0619) تطبيق -29 ℃ ~ + 425 ℃ وسائل الإعلام w.o.g. مواد لا جزء اسم كربون   الصلب ل astm أشابة   الصلب ل astm غير القابل للصدأ   الصلب ل astm WCB lcb wc6 wc9 ج 5 راجع 8 CF 8M راجع 3 CF3M 1 الجسم a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 2 حلقة مقعد أ 105 A350 lf2 a182 f11 a182 f22 a182 f5 a182 f304 a182 f316 a182 f304l a182 f316l 3 الجوز القرص a182 f304 a182 f304 a182 f316 a182 f304l a182 f316l 4 غسالة القرص a182 f304 a182 f304 a182 f316 a182 f304l a182 f316l 5 القرص a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 6 مفصل a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 7 دبوس المفصلي a182 f304 a182 f304 a182 f316 a182 f304l a182 f316l 8 نير a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 9 بونيه الجوز أ 194 2 ساعة أ 194 4 أ 194 7 أ 194 8 10 بونيه الترباس أ 193 ب 7 أ 193 l7 أ 193 ب 16 أ 193 ب 8 11 طوقا دوامة الفولاذ المقاوم للصدأ   الجرح الجرافيت أو الفولاذ المقاوم للصدأ دوامة الجرح ptfe 12 التغطية a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 13 ربط المسمار صلب 14 لوحة الاسم الفولاذ المقاوم للصدأ أو الألومنيوم 15 برشام الفولاذ المقاوم للصدأ أو الألومنيوم مواد أخرى (سبيكة 20 ، ansi 321 ، monel hastelloy ، إلخ)   متوفرة عند الطلب س خدمة اور خدمة العملاء الجيدة هي نفس قيمة المنتج نفسه. في dervos ، سوف نقدم مجموعة كاملة من خدمة العملاء لتجعلك تشعر بالراحة عند التعامل معنا. تقديم تقرير الإنتاج الأسبوعي عندما يبدأ الإنتاج ، ستحصل على تقرير الإنتاج أسبوعيًا ، بحيث يمكنك الحصول على أمر جيد لحالة المنتج وإبلاغ عميلك في الوقت الحالي. تقدم ضمان 18 شهرا سيتم تقديم فترة ضمان 18 شهرًا بعد الشحن ، ولا داعي للقلق لشراء صمام من dervos. تقديم الحلول في غضون 3 أيام للشكاوى سيتم حل جميع الشكاوى في غضون 3 أيام ، في هذه الحالة ، يمكنك الرد في الوقت المناسب وحل المشكلات لعميلك ، لتخفيفها حتى عند حدوث الشكاوى.

صمام الاختيار cf8 الفولاذ المقاوم للصدأ
صمام ستانلس ستيل غير متحرك سوينغ

يتميز الصمام غير القابل للصدأ cf8 بالفولاذ المقاوم للصدأ بقرص من النوع غير المنزلق ، وطرف شفة 150 ansi ، وتصميم منفذ كامل. تفاصيل سريعة نوع عدم   صمام الرجوع (فحص الصمام) بحجم 8 " ضغط التصميم صف دراسي   150 اعمال بناء عدم   نوع سلام الإتصال الترددات اللاسلكية   شفة تصميم & أمبير ؛ صناعة اسمى   ب 16.34 من النهاية إلى النهاية اسمى   ب 16.10 الإتصال اسمى   ب 16.5 الضغط & أمبير ؛   مؤقت اسمى   ب 16.34 اختبار & أمبير ؛   تفتيش واجهة برمجة تطبيقات   598 مواد الجسم أ 351   راجع 8 تقليم المواد SS304 وسائل الإعلام w.o.g. التعديلات المتاحة لصمامات dervos -صمام الضغط حجم الصمام تجفيف و أمبير. تتحمل كامل -الهيئة & أمبير ؛ تقليم المواد (القرص ، المقعد ، الدبوس ، الربيع) اتصال نهاية (شفة ، وزن الجسم ، sw ، الخيط ، رقاقة ، العروة) عملية متاحة (الجذع العاري مع المحركات) -ثقل موازن متوفر - اسطوانة متاحة -تخصيص طلاء - تغليف حسب الطلب المعرفة ذات الصلة ما هو صمام الاختيار غير سلامه؟ المطرقة المائية هي ظاهرة هيدروليكية تخضع لتغير مفاجئ في معدل تدفقها وتنتج عن الإغلاق المفاجئ أو الارتطام. ستقلل مطرقة الماء من كفاءة العملية ، وتتسبب في تلف الصمام ، وتسربات وصلات الحشية ومشاكل أخرى. تم تصميم صمام الاختيار غير المنزلق لتقليل المطرقة المائية. يمكن أن يمنع الزنبرك الداخلي القرص من الانغلاق عن قرب. يمكن أن يؤدي تصميم صمام عدم الانزلاق إلى التخلص من تقلبات الضغط والاهتزاز والأضرار. بالإضافة إلى ذلك ، يعاني القرص والربيع من التآكل البسيط بمرور الوقت ، مما سيطيل إلى حد كبير من عمر الخدمة للفحص غير المضاد للارتفاع مقارنة بصمام الاختيار المتأرجح.

صمام الاختيار البديل
api 6d wcb rf نوع سوينغ تحقق صمام cl600 4 بوصة 6 بوصة

api6d نوع التأرجح صمام الاختيار rf ربط انسحب بونيه كامل المسام الجسم wcb ، wcb + 13cr القرص ، a105 + 13cr حلقة مقعد ، المفصلي wcb. درجة حرارة مناسبة في -29 ℃ ~ + 425 ℃ تفاصيل سريعة نوع صمام الاختيار البديل بحجم 4 بوصة - 6 بوصات ضغط التصميم cl600 اعمال بناء قبل الميلاد ، نوع التأرجح نوع الاتصال شفة نوع العملية - مواد الجسم WCB مخادع wcb + 13cr مادة مفصلية WCB مادة المقعد a105 + 13cr كود التصميم واجهة برمجة التطبيقات 6 د وجها لوجه البعد Asme b16.10 اختبار وفحص api 598 الضغط & أمبير ؛ مؤقت اسمي ب 16.34 متوسط الماء والنفط والغاز الأصل الصين

خمسة آلاف ومائتان واحد
API 6D nps 14 يلقي الصلب سوينغ فحص غطاء مسامير الغطاء 600LB

مُصنع صيني Dervos تقدم صمامات عدم رجوع 14 بوصة مصنوعة وفقًا لـ API 6D. تغطي الميزات الأخرى CL300 و rf end Connection و WCB جسم.

صمام الاختيار البديل
Cast Steel NPS 6 فئة 150 Swing Check Valve RF WCB ميتاليك جالس

صمام الاختيار الأرجوحة مصنوع من A216، نوع من WCB. المصنعة وفقا ل BS1868، صمام الاختيار هو 6 بوصة و 150LB. و الصمام قادر في درجة حرارة العمل بين -19 إلى 425 درجة مئوية.

صمام الاختيار البديل
DIN Standard 1.0619 صمام تحقق سوينغ DN80 PN40

يتكون صمام الاختيار البديل من 1.0619، وهو نوع من الصلب الكربوني، على النحو التاليDIN قياسي.تحقق صمام هو DN80 و pn40، أو 3 بوصة و 300lb. و الصمام قادر في درجة حرارة العمل بين -19 إلى 425 درجة مئوية.

فحص الصمام
صمام فحص سوينغ فولاذي مزور API 602 1 بوصة CL150 RF

يحتوي صمام فحص التأرجح 1 بوصة على غطاء محرك مثبت بمسامير ونهاية شفة RF . تم تصميم صمام فحص التأرجح الفولاذي المطروق بتجويف مخفض وفقًا لمعيار API 602 . يمكن أن تقوم dervos أيضًا بتخصيص الخدمة وفقًا لطلبات العملاء على الأحجام , تقييمات التصميم , المواد , والمعايير وما إلى ذلك .

فحص الصمام
DIN 3840 صمام فحص التأرجح DN200 PN40 من الفولاذ المصبوب

مصنوع من صب عالي الجودة , يحتوي صمام فحص التأرجح DIN على جسم فولاذي مصبوب بهيكل غطاء محرك مثبت بمسامير ووصلة شفة . تم تصميم الصمام بأداء إحكام جيد وأقل تأثير مطرقة مائية .

فحص الصمام
DN400 PN10 صمام الاختيار المتأرجح المصبوب WCB RF

تم تصنيع صمام فحص DN400 PN10 وفقًا لمعيار DIN. جسم الصمام مصنوع من WCB. تتميز بالخصائص الهيكلية لنوع التأرجح والطول الهيكلي البالغ 310 مم. لديها وضع اتصال RF. يحتوي هذا الصمام على مخمد مدمج ، والذي يستخدم بشكل أساسي لامتصاص الصدمات وتبديد الطاقة.

صمام الاختيار البديل
6 "1500LB المصبوب الصلب البديل صمام الاختيار WCB API6D BW

تم تصنيع صمام عدم رجوع 6 "1500LB وفقًا لمعيار API 6D. جسم الصمام مصنوع من WCB. له الخصائص الهيكلية لنوع التأرجح. ولديه وضع اتصال BW.

صمام الاختيار البديل
API 6 "150LB المصبوب الصلب سوينغ فحص الصمام RF BC WCB

6 "صمام فحص 150LB مصنوع وفقًا لمعيار API 6D. جسم الصمام مصنوع من WCB. له الخصائص الهيكلية لنوع التأرجح والمسمار الخارجي ، ووضع التوصيل هو RF.

اترك رسالة

    إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

الصفحة الرئيسية

منتجات

حول

اتصل