العربية

العربية

Get a Quote
منتجات

منتوجات جديدة

أخبار الشركة

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
2023-05-31

يعتقد الكثير من الناس أن كلاً من صمامات البوابة وصمامات الكرة الأرضية لها وظيفة قطع الوسائط ، لذلك لا تختلف عند استخدامها. في الواقع ، هناك اختلافات معينة بين صمامات البوابة وصمامات الكرة الأرضية في التطبيقات العملية. Gate Valve and Structural Diagram Globe Valve and Structural Diagram 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and

تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
2023-05-24

صمام الفراشة ذو الختم الصلب الثلاثي اللامركزي ، كصمام عالي الأداء ، له مزايا مثل مقاومة التآكل ، الختم الموثوق به ، وعزم الدوران الصغير للفتح. سطحه المحكم هو سطح مخروطي مائل ، والاتصال بين حلقة إحكام إغلاق جسم الصمام وحلقة إحكام تجميع لوحة الفراشة هي ملامسة السطح. مبدأ عملها هو قيادة مجموعة لوحة الفراشة مباشرة عن طريق عزم دوران جهاز القيادة ، مما يتسبب في اتصال حلقة الختم الخاصة بمجموعة لوحة الفراشة بشكل كامل بحلقة إحكام إغلاق جسم الصمام وتوليد تشوه مرن للختم. الخصائص الهيكلية 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

رفع صمام الاختيار
加载中...

مزورة الصلب صمام شفة رفع شفة 1 بوصة 150 رطل

  • دفع:

    30% T/T When Order, 70% T/T Before Shipment
  • أصل المنتج:

    China
  • اللون:

    Customization
  • ميناء الشحن:

    Shanghai China
  • المهلة:

    15~35 days Ex Works after order confirmation
  • Material:

    Carbbon Steel
الاستفسار الآن
تفاصيل المنتج

تم تصميم صمام فحص الرفع الفولاذي المطروق مع الضغط من الفئة 150 والحجم الاسمي 1 بوصة وفقًا لمعيار api 602. كما نسميه أيضًا صمام فحص المكبس.


تفاصيل سريعة

نوع

التحقق من   صمام

بحجم

1 "

ضغط التصميم

150 رطل

اعمال بناء

مصعد   نوع ، نوع المكبس

الإتصال

الترددات اللاسلكية   شفة

تصميم & أمبير ؛ صناعة

واجهة برمجة تطبيقات   602

من النهاية إلى النهاية

اسمى   ب 16.10

الإتصال

اسمى   ب 16.5

الضغط & أمبير ؛   مؤقت

اسمى   ب 16.34

اختبار & أمبير ؛   تفتيش

واجهة برمجة تطبيقات   598

مواد الجسم

أستم   a105n

تقليم المواد

تقليم   5

نطاق درجة الحرارة

-29 ℃ ~ + 425 ℃

وسائل الإعلام

w.o.g.


Piston Check Valve


فحص الأبعاد

Forged Steel Piston Check Valve


اختبار الضغط

Flanged Lift Check Valve


التعبئة

Dervos Industrial Valve Supplier

اترك رسالة

إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

منتجات ذات صله
صمام الاختيار ذو شفة المكبس
يلقي الصلب gs-c25 صمام رفع المكبس pn16 rf شفة

تم تصميم صمام عدم الرجوع المصنوع من الفولاذ المصبوب بقرص من نوع المكبس ، وغطاء مثبت بمسامير ، وشفة pn16 rf. يتوافق صمام الفحص ذو التحميل الزنبركي مع الدينار 3356. تفاصيل سريعة نوع التحقق من   صمام (صمام عدم الرجوع) القطر الاسمي د   150 الضغط الاسمي ص 16 اعمال بناء مصعد   نوع / نوع المكبس ، بونيه انسحب الإتصال ذات حواف   الإتصال تصميم & أمبير ؛ صناعة الدين   3356 من النهاية إلى النهاية en   558 الإتصال en   1092 اختبار & أمبير ؛   تفتيش en   12266 مواد الجسم كربون   الصلب gs c25 وسائل الإعلام w.o.g. حدود المنتجمواد الجسم: cs ، ss ، سبائك الصلب ، ci ، البرونز ، النحاسنطاق الحجم: 2 "~ 12" (dn50 ~ dn300)نوع النهاية: لحام بعقب ، لحام مأخذ ، مشفه ، مشدودنطاق الضغط: 150 رطل ~ 2500 رطل (pn16 ~ pn420)نطاق درجة الحرارة: -46 ℃ ~ + 425 ℃ المعرفة ذات الصلةما هو صمام فحص المكبس؟ عادة ، لدينا صمام الاختيار من نوع التأرجح وصمام فحص نوع الرفع. ينتمي كل من صمام فحص المكبس وصمام فحص الكرة إلى صمام فحص نوع الرفع. في كثير من الحالات ، يستخدم صمام فحص المكبس الزنبرك للاحتفاظ بالقرص في وضع مغلق. هيكل صمام فحص المكبس مشابه جدًا لصمام الكرة الأرضية فقط بدون التشغيل اليدوي. نظرًا لقرصها من نوع المكبس وخصائص التسرب الفائقة ، فإن صمامات فحص المكبس مناسبة للحجم الصغير وظروف الضغط العالي.

خمسة آلاف ومائتان واحد
1 بوصة SS F316 صمام فحص كروي 150 رطل الترددات اللاسلكية

نظرًا لبساطة تدفقها ، فهي فعالة وخالية من الصيانة تقريبًا تصميم غير مؤلم كرة فولاذية يتم تحديدها واستخدامها بشكل شائع في محطات الرفع الغاطسة لمياه الصرف الصحي

خمسة آلاف ومائتان واحد
الكربون الصلب رفع الربيع تحميل صمام صمام RF DN50 PN40

هذا صمام الاختيار المحملة في الربيع، المصنوع وفقا ل DIN3840، لا يتطلب ضغط خطورة أو اتجاه استراحا للعمل أو مادة الجسم 1.0619 تمكين الصمام للعمل تحت حرارة كبيرة و إنه الربيع يمكن أن يستوعب مجموعة واسعة من درجة الحرارة، أيضا.

فحص الصمام
14 بوصة من خلال قناة تحقق صمام فئة 150

الصمام الصيني الصيني Dervos لوازم فحص صمام مميز من خلال Conduit، وقرص نوع التوصيل واستبدال مقعد. نتوقع هذه 14 بوصة 150LB تحقق صمام، أنواع أخرى صمامات المواد المختلفة، الأحجام هي أيضا متاحة.

رفع صمام الفحص
DN50 PN160 الربيع تحميل صمام فحص المصبوب الصلب

صمام فحص الرفع المحمل بنابض DN50 PN160 ، المصنوع من الفولاذ المصبوب ، يتم تشغيله عن طريق التدفق والضغط التفاضلي بمساعدة ضغط الزنبرك. ولا تتطلب أي تدخل بشري مطلوب للعمل ، سهل الاستخدام.

فحص الصمام
4 ' ' فئة 300 نوع فوهة ، صمام عدم رجوع إلى صمام WCB

ميزات صمام عدم الرجوع من الفولاذ المقاوم للصدأ في قرص من النوع غير المضاد , زنبركي INCONEL X750 , جسم صمام WCB . يمتلك هذا الصمام أداءً ديناميكيًا ممتازًا ويقلل من الاهتزازات والضوضاء .

رفع صمام الفحص
1 "2500LB الضغط الذاتي الختم رفع فحص الصمام FNPT F316L

1 "صمام فحص 2500LB مصنوع وفقًا لمعيار ASME B16.34. جسم الصمام مصنوع من F316L. له الخصائص الهيكلية لنوع الرفع ، الختم الذاتي بالضغط ، القطر التقليدي ، وضع التوصيل هو FNPT.

ارتفاع ضغط 2500 رطل صمام عدم العودة
ختم ضغط إمالة القرص الاختيار صمام 12 بوصة 2500lb

تم تصميم صمام الاختيار ذو الضغط العالي 12 بوصة بغطاء مانع للتسرب ، وحافة rtj ، وقرص قابل للإمالة ، ومصنوع من جسم الكربون الصلب wcb وختم الوجه الصلب. تفاصيل سريعة نوع التحقق من   صمام بحجم 12 " ضغط التصميم 2500 رطل اعمال بناء الضغط   غطاء الختم ، نوع القرص المائل الإتصال rtj   شفة تصميم & أمبير ؛ صناعة اسمى   ب 16.34 من النهاية إلى النهاية اسمى   ب 16.10 الإتصال اسمى   ب 16.5 الضغط & أمبير ؛   مؤقت اسمى   ب 16.34 اختبار & أمبير ؛   تفتيش واجهة برمجة تطبيقات   598 مواد الجسم أ 216   WCB تقليم المواد 13cr + stl نطاق درجة الحرارة -29 ℃ ~ + 350 ℃ وسائل الإعلام w.o.g. حدود المنتج نطاق مواد الجسم: wcb ، wcc ، wc1 ، cf8m ، cf8 ، cf3 ، cf3m ، lcb ، lcc نطاق الحجم: 2 "~ 60" (dn50 ~ dn1500) نوع اتصال النهاية: نهاية شفة ، نهاية اللحام نطاق ضغط التصميم: 150 رطل ~ 600 رطل نطاق درجة الحرارة: -46 ℃ ~ + 425 ℃ المعرفة ذات الصلة ما هو صمام فحص القرص المائل؟ يحتوي قرص صمام فحص القرص المائل على نقطة محورية في مركزه. يتم تصميمه للتغلب على نقاط الضعف في صمام الاختيار البديل من النوع العام. مقارنة بصمام الاختيار من نوع التأرجح ، يمكن أن يظل صمام فحص الإمالة مفتوحًا تمامًا وثابتًا بمعدلات تدفق منخفضة. وهذا يعني أن صمام الاختيار المتأرجح يحتاج إلى سرعة عالية من السوائل لإبقاء القرص مفتوحًا وضغط تشقق أعلى. في حالة الضغط المنخفض ، يكون انخفاض ضغط صمام فحص القرص المائل أقل بكثير من نوع التأرجح. ولكن عند معدل تدفق أعلى ، فإن صمام فحص الإمالة لديه انخفاض ضغط أعلى من نوع التأرجح.

6 بوصة صمام الاختيار المزدوج
صمام الاختيار ويفر البرونزية c95800 قرص مزدوج 6 بوصة

تم تصميم صمام فحص الرقاقة المزدوجة وفقًا لـ api 594 واختبارها لكل api 598. صمام عدم الرجوع البرونزي ينطبق على مياه البحر. تفاصيل سريعة نوع التحقق من   صمام بحجم 6 " ضغط التصميم صف دراسي   150 اعمال بناء مزدوج   نوع اللوحة ، مع التجنيب الإتصال رقاقة   نوع تصميم & أمبير ؛ صناعة واجهة برمجة تطبيقات   594 من النهاية إلى النهاية اسمى   ب 16.10 الإتصال اسمى   ب 16.5 الضغط & أمبير ؛   مؤقت اسمى   ب 16.34 اختبار & أمبير ؛   تفتيش واجهة برمجة تطبيقات   598 مواد الجسم الألومنيوم   البرونزية c95800 تقليم المواد الألومنيوم   البرونزية c95800 وسائل الإعلام w.o.g. فحص الأوردة بعد تركيب الصمام جودة الصمام هي واحدة من وجهات النظر التي نهتم بها أكثر. في dervos ، تبدأ مراقبة الجودة من المواد الخام ، والقطع ، والتجميع إلى التفتيش قبل الشحن. بعد التجميع ، سيقوم فريق فحص الجودة بإجراء فحص بصري وفحص الأبعاد والاختبار الهيدروليكي واختبار الهواء. يجب أن يجتاز كل طلب الاختبار وفقًا لمعايير الفحص. وإلا لن يقوم فريق فحص الجودة لدينا بإطلاق الشحنة. تقارير التفتيش يمكن استخدام المستندات لإثبات كيفية التحكم في جودة الصمام. جنبا إلى جنب مع كل طلب ، سيقدم Dervos للعملاء تقرير فحص & أمبير ؛ تقرير اختبار مطحنة 3.1 مجانًا. في تقرير فحص dervos ، سترى النتائج الفعلية للتحقق من البعد واختبار الضغط إلى جانب صورة الطلاء والتعبئة. يتم عرض جميع هذه المعلومات من خلال البيانات والصور الواضحة. في تقرير اختبار المطحنة 3.1 ، سوف نعرض لك التركيب الكيميائي والخصائص الميكانيكية ورقم الحرارة لجسم الصمام وغطاء المحرك والجذع والقرص وما إلى ذلك.

صمام فحص الرقاقة
API594 3 "150LB المزدوج لوحة رقاقة صمام فحص API598 LCC

صمام فحص بسكويت الويفر 3 "150LB مصنوع وفقًا لمعيار API594. جسم الصمام مصنوع من A352 LCC + 316. له الخصائص الهيكلية للوحة المزدوجة والنوع المدمج. وضع التوصيل هو نوع رقاقة.

Asme b16.34 y نوع صمام الكرة الأرضية
asme b16.34 y نوع الكرة الأرضية صمام المكونات نوع القرص 4 بوصة cl150

y نوع صمام الكرة الأرضية. الجسم cf8 / غطاء المحرك ، القرص / الجذعية f304 ، ss304 + حشية الجرافيت المرنة والمسمار البرونزي والجوز. القرص نوع القابس ورفع اتصال شفة الوجه. بسرعة التفاصيل نوع صمام العالم بحجم 4 بوصة ضغط التصميم cl150 اعمال بناء y نوع صمام الكرة الأرضية نوع الاتصال رفع اتصال شفة الوجه عملية عقارب كود التصميم اسمي ب 16.34 وجها لوجه Asme b16.10 اختبار & أمبير ؛ تفتيش api 598 مواد الجسم راجع 8 نطاق درجة حرارة -29 ~ 538 ℃ تطبيق wog

العجلة 1.0619 صمام بوابة
dn200 pn40 الترباس عقارب بونيه 1.0619 صمام بوابة

يتبع صمام بوابة غطاء المحرك الترباس معيار التصميم en1984 ، اتصال ذو حواف مرفوعة ، برغي خارجي ونير ، تشغيل عجلة اليد ، مادة gp240gp / غطاء المحرك / إسفين ، جذع f6a ، ختم معدني / جلوس. تفاصيل سريعة نوع صمام البوابة بحجم dn200 ضغط التصميم pn40 اعمال بناء صمام بوابة بونيه الترباس نوع الاتصال رفع اتصال شفة الوجه عملية عقارب كود التصميم en 1984 وجها لوجه الدين 3202 نهاية الاتصال en 1092-1 اختبار & أمبير ؛ تفتيش en 12266-1 مواد الجسم gp240gh نطاق درجة حرارة -29 ~ 425 ℃ تطبيق wog

اترك رسالة

    إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

الصفحة الرئيسية

منتجات

حول

اتصل