العربية

العربية

Get a Quote
منتجات

منتوجات جديدة

أخبار الشركة

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
2023-05-31

يعتقد الكثير من الناس أن كلاً من صمامات البوابة وصمامات الكرة الأرضية لها وظيفة قطع الوسائط ، لذلك لا تختلف عند استخدامها. في الواقع ، هناك اختلافات معينة بين صمامات البوابة وصمامات الكرة الأرضية في التطبيقات العملية. Gate Valve and Structural Diagram Globe Valve and Structural Diagram 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and

تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
2023-05-24

صمام الفراشة ذو الختم الصلب الثلاثي اللامركزي ، كصمام عالي الأداء ، له مزايا مثل مقاومة التآكل ، الختم الموثوق به ، وعزم الدوران الصغير للفتح. سطحه المحكم هو سطح مخروطي مائل ، والاتصال بين حلقة إحكام إغلاق جسم الصمام وحلقة إحكام تجميع لوحة الفراشة هي ملامسة السطح. مبدأ عملها هو قيادة مجموعة لوحة الفراشة مباشرة عن طريق عزم دوران جهاز القيادة ، مما يتسبب في اتصال حلقة الختم الخاصة بمجموعة لوحة الفراشة بشكل كامل بحلقة إحكام إغلاق جسم الصمام وتوليد تشوه مرن للختم. الخصائص الهيكلية 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

صمام الكرة الصلب مزورة
加载中...

مزورة مرتكز مرتكز الدوران صمام الكرة dn50 pn160 a105 رافعة

  • دفع:

    30% T/T When Order, 70% T/T Before Shipment
  • أصل المنتج:

    China
  • اللون:

    Customization
  • ميناء الشحن:

    Shanghai China
  • المهلة:

    30~60 days Ex Works after order confirmation
  • Material:

    Forged Steel A105N
  • Method of Operation:

    Lever
الاستفسار الآن
تفاصيل المنتج

صمام الكرة الفولاذية المطروق مصنوع من جسم a105n وتقليم 17-4ph مع نهاية شفة rtj وتشغيل رافعة. هذه يتميز الصمام الكروي المركب مرتكزًا على مرتكز الدوران بميزات أداء موثوق وموثوق عملية سهلة.


تفاصيل سريعة

نوع

صمام الكرة

بحجم

dn50

الضغط

pn160

اعمال بناء

ثلاث قطع   الجسم ، تتحمل كامل ، شنت مرتكز الدوران الكرة

الإتصال

شفة الترددات اللاسلكية   النهاية

وضعية التشغيل

رافعة

مواد الجسم

a105n

تقليم المواد

f304 + الكرة enp ، جذع 17-4ph ، مقعد نظرة خاطفة

تصميم & أمبير ؛ صناعة

واجهة برمجة التطبيقات 6 د

الضغط & أمبير ؛ كود مؤقت

اسمي ب 16.34

من النهاية إلى النهاية

Asme b16.10

نهاية الاتصال

Asme b16.5

تفتيش

api 6d ،   api 598

نطاق درجة حرارة

-29 ℃ ~ + 200 ℃

متوسط

نفط،   الماء والغاز


اختبار الضغط

Trunnion Ball Valve


فحص الأبعاد

High Pressure Ball Valve


التعبئة

Trunnion Flanged Ball Valve


اترك رسالة

إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

منتجات ذات صله
علبة التروس نوع علبة التروس ذات حواف
شنت الكرة مرتكز مرتكز الدوران الصلب صمام 12 بوصة 600 رطل

يحتوي الصمام الكروي المثبت على مرتكز الدوران 600 رطل 12 بوصة على علبة تروس ، شفة rtj ، تصميم آمن للحريق لكل api 607. تم تصميم صمام الكرة المكون من 3 قطع لكل api 6d. ميزة التصميم & أمبير ؛ فائدة 1. مقاومة تدفق صغيرة يعني انخفاض ضغط أقل 2. هيكل صمام بسيط وخفيف الوزن 3.مختلف مواد الختم المتاحة ، من المواد المعدنية tcc ، الأقمار الصناعية ، الفولاذ المقاوم للصدأ إلى مادة لينة ptfe ، تفلون ، النايلون ، نظرة خاطفة وغيرها 4. الأداء الجيد لكل من الختم المعدني وختم لينة 5. عملية مريحة وسريعة للصمام 6.سهلة الصيانة بسبب حلقة المقعد المتجددة 7.عند فتحه أو إغلاقه بالكامل ، يتم عزل وجه الصمام المحكم من التآكل المتوسط. 8. مجموعة واسعة من التطبيقات من حيث الحجم وتصنيف الضغط تفاصيل سريعة نوع صمام الكرة بحجم 12 " الضغط الفئة 600 اعمال بناء مرتكز الدوران   كرة محمولة ، من ثلاث قطع ، مدخل جانبي الإتصال شفة الترددات اللاسلكية عملية هيأ   تعمل الجسم   مواد ASTM A105 تصميم & أمبير ؛   صناعة واجهة برمجة التطبيقات 6 د الضغط   & أمبير ؛ مؤقت اسمي ب 16.34 وجها لوجه Asme b16.10 النهاية   الإتصال Asme b16.5 اختبار & أمبير ؛   كود التفتيش api 598 آمنة النار api 607 درجة الحرارة   نطاق -29 ℃ ~ + 200 ℃ متوسط الماء والنفط   والغاز الأصل الصين مواصفات المواد لا جزء اسم كربون   الصلب ل astm غير القابل للصدأ   الصلب ل astm WCB lcb راجع 8 CF 8M راجع 3 CF3M 1 طبقة تحتية WCB lcb راجع 8 CF 8M راجع 3 CF3M 2 الترباس السفلي أ 193 ب 7 A320 l7 أ 193 ب 8 3 مرتكز الدوران a182 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 4 الجسم a216 wcb a352 lcb a351 cf8 a351 cf8m a351 cf3 a351 cf3m 5 بونيه الجوز أ 194 2 ساعة أ 194 4 أ 194 8 6 بونيه الترباس أ 193 ب 7 A320 l7 أ 193 ب 8 7 قبعة a216 wcb a352 lcb a351 cf8 a351 cf8m a351 cf3 a351 cf3m 8 طوقا ss دوامة الجرح / الجرافيت أو   ss الجرح اللولبي / ptfe 9 كم رمح SS / الجرافيت 10 حلقة مقعد rptfe أو بوم 11 كرة a105 / ep.cr أو f6 a182 f6 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 12 مقعد a105 / ep.cr أو f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 13 ربيع 17-17ph (inconel ل   nace) سبائك ni-cr 14 يا الدائري فيتون 15 إيقاف a182 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 16 غطاء مانع للتسرب a182 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 17 يا الدائري فيتون 18 المحرك والعتاد & emsp؛ كانت المادة   وفقًا لمعيار ASTM المعرفة ذات الصلة ما الفرق بين صمام الكرة العائمة والمرور؟ الجزء الكروي من الصمام الكروي العائم متحرك. تحت ضغط الوسط ، تحتوي الكرة على إزاحة معينة وتضغط على سطح مانع التسرب لضمان إغلاقها المحكم. الهيكل العائم مناسب لصمام الكرة بحجم صغير ومنخفض & أمبير ؛ تصنيف الضغط المتوسط. تم إصلاح جزء الكرة من الصمام الكروي المثبت على مرتكز الدوران. تحت الضغط المتوسط ​​، يتحرك المقعد العائم نحو الكرة لضمان الختم. غالبًا ما يكون الصمام الكروي المرتكز على مرتكز الدوران بحجم أكبر وضغط أعلى.

شنت api 6d مرتكز الدوران صمام الكرة
يلقي الصلب الكرة مرتكز الدوران صمام 24 بوصة 300 رطل api 6 د

يلقي صمام الكرة ذو الشفة من الفئة 300 جسمًا من الفولاذ WCB ، كرة فولاذية مقاومة للصدأ ، ساق ، حلقة مقعد مع إدراج مقعد devlon. ميزة التصميم 1. تصميم آمن من الحرائق حسب api 607 2. مع حقن مانع التسرب للتزييت الذاتي 3. مع تصميم الاستاتيكيه 4. مع الجذعية المضادة للانفجار 5. مع منفذ تنفيس واستنزاف 6. تصميم تتحمل كامل 7.ثلاثة قطعة نوع والكرة مرتكز الدوران تعمل 8.gear لسهولة التشغيل تفاصيل سريعة نوع صمام الكرة بحجم 24 " الضغط انسي 300 اعمال بناء نوع مرتكز الدوران   كرة ، هيكل 3 قطع ، مدخل جانبي ، تجويف كامل الإتصال شفة   الإتصال عملية ناقل الحركة   عملية الجسم   مواد ASTM A216   WCB كود التصميم واجهة برمجة التطبيقات 6 د الضغط   & أمبير ؛ كود مؤقت اسمي ب 16.34 وجها لوجه Asme b16.10 النهاية   الإتصال Asme b16.5 اختبار & أمبير ؛   كود التفتيش api 598 ،   واجهة برمجة التطبيقات 6 د آمنة النار api 607 درجة الحرارة   نطاق -29 ℃ ~ + 200 ℃ متوسط wog الأصل الصين البعد الفئة 300 د مم 50 65 80 100 150 200 250 300 350 400 450 500 600 700 NPS في 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 ل (الترددات اللاسلكية) مم 216 241 283 305 403 502 568 648 762 838 914 991 1143 1346 في 8.5 9.5 11.13 12 15.88 19.75 22.38 25.5 30 33 36 39 45 53 ل 1 (وزن الجسم) مم 216 241 283 305 457 521 559 635 762 838 914 991 1143 1346 في 8.5 9.5 11.13 12 18 20.5 22 25 30 33 36 39 45 53 ل 2 (رتج) مم 232 257 298 321 419 518 584 664 778 854 930 1010 1165 1372 في 9.13 10.13 11.75 12.63 16.5 20.38 23 26.13 30.63 33.63 36.63 39.75 45.89 54 ح مم 153 165 195 213 272 342 495 580 625 720 790 840 1050 1150 في 6.02 6.5 7.68 8.39 10.7 13.5 19.5 22.85 24.6 28.35 31 33.1 41.34 45.3 افعل (ث) مم 400 400 600 850 1100 1500 * 350 * 350 * 600 * 600 * 800 * 800 * 800 * 800 في 15.74 15.74 23.62 33.46 43.3 59 13.8 13.8 23.6 23.6 31.5 31.5 31.5 31.5 الترددات اللاسلكية (كلغ) & emsp؛ 18 27 47 80 118 200 365 530 740 1030 1320 1540 2600 3900 وزن الجسم (كجم) & emsp؛ 14 2 38 65 105 185 342 503 713 1000 1285 1498 2540 3825 * تعمل معدات دودة أو المحرك الكهربائي نظام فحص جودة dervos في dervos ، نتحكم في الجودة طوال عملية التصنيع بأكملها. فحص الصب: على الرغم من فحص الصب ، يمكننا معرفة مشكلة المواد الخام ، مثل الصب الرديء ، وسمك الجدار غير المؤهل ، والتركيب الكيميائي وما إلى ذلك ، مما يضمن عدم تعرضك للغش. التفتيش بالقطع: من ناحية ، يمكننا ضمان دقة المعالجة من خلال هذه العملية. من ناحية أخرى ، يمكننا اكتشاف خطأ بالقطع في أقرب وقت ممكن ، لكسب المزيد من الوقت للإصلاح وإعادة التشكيل الفحص النهائي: تشمل أنشطة الفحص النهائي مراجعة الوثائق والمستندات ومراقبة الجودة والفحص البصري وفحص الأبعاد واختبار الضغط والطلاء وفحص التعبئة. لست بحاجة إلى الحضور والتفتيش شخصيًا ويمكن تقديم جميع المستندات كإثبات.

صمام كروي مرتكز على مرتكز الدوران
شنت مرتكز الدوران dn300 pn63 dbb صمام الكرة

صمام كروي مرتكز على مرتكز الدوران dn300 pn63 ذو كتلة مزدوجة تتحمل وختم pmss (ختم معدني + ختم ناعم) تشغيل علبة التروس الجذعية المقاومة للانفجار مع جسم lf2 ، lf2 + enp ball / seat و 410 ساق. تفاصيل سريعة نوع صمام الكرة بحجم dn300 ضغط التصميم pn63 اعمال بناء دبب ، صمام مرتكز على مرتكز الدوران نوع الاتصال شفة نوع العملية تعمل علبة التروس مواد الجسم LF2 مادة الكرة lf2 + enp المواد الجذعية 410 مادة المقعد lf2 + enp كود التصميم واجهة برمجة التطبيقات 6 د وجها لوجه البعد واجهة برمجة التطبيقات 6 د نهاية الاتصال Asme b16.5 الضغط & أمبير ؛ مؤقت اسمي ب 16.34 متوسط الماء والنفط والغاز الأصل الصين

صمام كروي مرتكز على مرتكز الدوران
api 6d صمام مرتكز الدوران الكرة 8 بوصة فئة 300 wcb علبة التروس

تم تصميم صمام الكرة api 6d مع شنت الكرة مرتكز الدوران وهيكل تتحمل كامل. يحتوي الصمام الكروي ذو الحافة على 300 رطل ضغط التصميم والحجم الاسمي 8 بوصة مع وضع تشغيل علبة التروس ، المطابقة لمتطلبات nace mr0175. تفاصيل سريعة نوع صمام الكرة بحجم 8 " الضغط 300 رطل اعمال بناء جسم من قطعتين ،   تتحمل كامل ، الكرة مرتكز الدوران الإتصال شفة الترددات اللاسلكية وضعية التشغيل ناقل الحركة مواد الجسم a216 wcb تقليم المواد الكرة / الساق f6a ، مقعد rptfe تصميم & أمبير ؛ صناعة واجهة برمجة التطبيقات 6 د الضغط & أمبير ؛ كود مؤقت اسمي ب 16.34 من النهاية إلى النهاية Asme b16.10 نهاية الاتصال Asme b16.5 تفتيش api 6d ،   api 598 نطاق درجة حرارة -29 ℃ ~ + 200 ℃ متوسط نفط،   الماء والغاز التعبئة Dervos اختبار اللوحة & أمبير ؛ نقل اختبار الضغط وأمبير. فحص الأبعاد

خمسة آلاف ومائتان واحد
مزورة الصلب 3 قطعة شنت مرتكز الدوران صمام الكرة 600 رطل API6D

API 6D الكرة صمام تصميم مرتكز الدوران شنت الكرة تتحمل كامل هيكل. في ذات حواف الكرة صمام 600LB ضغط التصميم و 10 بوصة الاسمي الحجم مع علبة التروس وضع التشغيل ، مطابقة MR0175 التصنيف شرط.

خمسة آلاف ومائتان واحد
مشغل تروس صمام كروي مكون من 3 قطع A105 4 بوصة 150 رطل

ال 4 بوصة 150 رطل صمام الكرة هو 3 قطع واحد مع منفذ مخفض ، A105 الجسم ، F6A جذع وكرة و مقعد. ال ال تم تصنيع الصمام حسب لكل API6D ويتم اختباره بموجب API 598.

خمسة آلاف ومائتان واحد
150 رطل صمام كروي مزدوج من الفولاذ المقاوم للصدأ 4A

ال 150 رطل صمام كروي ، مصنوع من الفولاذ المقاوم للصدأ على الوجهين 4A ، له منفذ خاص على شكل v كرة. ال يعتبر الصمام مناسبًا بشكل خاص للوسائط التي تحتوي على ألياف وجزيئات صلبة صغيرة وملاط وما إلى ذلك

خمسة آلاف ومائتان واحد
3 قطعة موقف نوع الكرة صمام، ASTM A105N، فئة 800، 1 بوصة

الصين كربون الصلب الكرة صمام مزود عروض 3 قطعة صمام الكرة نوع موقف، ASTM A105N، فئة 800، 1 بوصة، كرة عائمة مجانية، API 608، بكالوريوس 5351.

صمام الكرة
صمام كروي مثبت على مرتكز الدوران DN150 PN16 تتحمل كامل ISO17292

DN150 PN16 Ball Valve مصنوع وفقًا لمعيار ISO 17292. يفي اختبار مقاومة الحريق بمتطلبات معيار API 607. جسم الصمام مصنوع من ASTM A105. وضع التشغيل هو تشغيل التوربينات. يتميز الصمام الكروي المثبت على مرتكز الدوران بطول هيكلي يبلغ 400 مم بالخصائص الهيكلية للتجويف الكامل.

صمام الكرة
8 "2500LB مرتكز الدوران الكرة صمام API 6D RTJ F51

تم تصنيع الصمام الكروي 8 "2500LB وفقًا لمعيار API 6D. جسم الصمام مصنوع من F51. يتميز بالخصائص الهيكلية للكرة المثبتة على مرتكز الدوران ، التجويف الكامل. ساق الصمام الطائر بالإضافة إلى أنه يلبي أيضًا متطلبات NACE MR0175.

صمام الكرة
API6D 2 "1500LB مزورة الصلب مرتكز الدوران صمام الكرة RTJ

تم تصنيع الصمام الكروي 2 "1500LB وفقًا لمعيار API 6D. ويتوافق أيضًا مع معيار التصميم NACE MR0175. جسم الصمام مصنوع من ASTM-A105. يتميز بالخصائص الهيكلية للتدفق الكامل والكرة المثبتة على مرتكز الدوران. وضع الاتصال ووضع تشغيل علبة التروس.

صمام الكرة
2 "CL150 V-Ball Valve Trunnion Mounted Valve API608 RF

تم تصنيع صمام الكرة CL150 2 "وفقًا لمعيار API 608. جسم الصمام مصنوع من ASTM A995 4A. له الخصائص الهيكلية من النوع V. وله وضع اتصال RF ، ووضع التشغيل هو عزم دوران قضيب مصقول.

اترك رسالة

    إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

الصفحة الرئيسية

منتجات

حول

اتصل