العربية

العربية

Get a Quote
منتجات

منتوجات جديدة

أخبار الشركة

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
2023-05-31

يعتقد الكثير من الناس أن كلاً من صمامات البوابة وصمامات الكرة الأرضية لها وظيفة قطع الوسائط ، لذلك لا تختلف عند استخدامها. في الواقع ، هناك اختلافات معينة بين صمامات البوابة وصمامات الكرة الأرضية في التطبيقات العملية. Gate Valve and Structural Diagram Globe Valve and Structural Diagram 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and

تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
2023-05-24

صمام الفراشة ذو الختم الصلب الثلاثي اللامركزي ، كصمام عالي الأداء ، له مزايا مثل مقاومة التآكل ، الختم الموثوق به ، وعزم الدوران الصغير للفتح. سطحه المحكم هو سطح مخروطي مائل ، والاتصال بين حلقة إحكام إغلاق جسم الصمام وحلقة إحكام تجميع لوحة الفراشة هي ملامسة السطح. مبدأ عملها هو قيادة مجموعة لوحة الفراشة مباشرة عن طريق عزم دوران جهاز القيادة ، مما يتسبب في اتصال حلقة الختم الخاصة بمجموعة لوحة الفراشة بشكل كامل بحلقة إحكام إغلاق جسم الصمام وتوليد تشوه مرن للختم. الخصائص الهيكلية 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

صمام توصيل ميزان الضغط برافعة
加载中...

ضغط مقلوب متوازن مشحم صمام توصيل 2 بوصة WCB

  • دفع:

    30% T/T When Order, 70% T/T Before Shipment
  • أصل المنتج:

    China
  • المهلة:

    30~60 days Ex Works after order confirmation
  • Material:

    WCB
  • Method of Operation:

    Lever
الاستفسار الآن
تفاصيل المنتج

صمام سدادة مشحم متوازن الضغط المعكوس 2 بوصة وجسم wcb مع معدن جالس. تنطبق على درجة حرارة أقل من 80 ℃.


تفاصيل سريعة

نوع

صمام التوصيل

بحجم

2 "

ضغط التصميم

150 رطل

اعمال بناء

صمام سد نوع مشحم

نوع الاتصال

اتصال شفة

عملية

ذراع / مفتاح ربط

كود التصميم

api6d

وجها لوجه

Asme b16.10

نهاية الاتصال

Asme b16.5

الضغط & أمبير ؛ مؤقت

اسمي ب 16.34

اختبار & أمبير ؛ تفتيش

api6d

مواد الجسم

a216 wcb

نطاق درجة حرارة

العلامة & lt ؛ 80 ℃

تطبيق

wog


2 inch inverted pressure balance lubricated plug valve


Natural Gas Plug Valve


2 inch Plug Valve


WCB plug valve metal seal

اترك رسالة

إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

منتجات ذات صله
يلقي صمام ضغط متوازن من الصلب المصبوب
مشحم صمام المكونات ضغط نوع متوازن 8 بوصة

يتميز صمام السدادة المشحم مقاس 8 بوصات بهيكل نوع مقلوب ومتوازن الضغط. إن صمام القابس المعدني ذو الحواف مناسب لتطبيق الغاز الطبيعي. تفاصيل سريعة نوع قابس كهرباء   صمام بحجم 8 " ضغط التصميم 300 رطل اعمال بناء مشحم   نوع ، نوع مقلوب ، نوع متوازن الضغط ، جالس معدني نوع الاتصال ذات حواف   الإتصال عملية هيأ   تعمل كود التصميم api 599 وجها لوجه اسمى   ب 16.10 نهاية الاتصال اسمى   ب 16.5 الضغط & أمبير ؛   مؤقت اسمى   ب 16.34 اختبار & أمبير ؛   تفتيش واجهة برمجة تطبيقات   598 مواد الجسم WCC نطاق درجة حرارة -29 ℃ ~ + 425 ℃ تطبيق ماء،   النفط والغاز البعد صف دراسي بحجم 1 1/2 2 2 1/2 3 4 6 8 10 12 300 ب 191 216 241 283 305 403 419 457 502 ج 156 165 191 210 254 318 381 445 521 د 20.6 22.2 25.4 28.3 31.8 36.5 41.3 47.6 50.8 ه 169 178 & emsp؛ 219 235 362 & emsp؛ & emsp؛ & emsp؛ F 106 118 & emsp؛ 143 165 187 248 300 392 س 73 92.1 105 127 157 216 270 324 381 الوزن (rf) 16 21 & emsp؛ 38 60 101 192 281 508 المعرفة ذات الصلة ما هو صمام التوصيل؟ صمام القابس هو صمام رباعي الدوران الذي يدور قابسه حول الخط المركزي لجسم الصمام لتحقيق وظيفة التشغيل. يتم استخدام صمام القابس لقطع وتوزيع وتغيير تدفق التدفق. حاليًا ، تُطبق صمامات السدادة بشكل أساسي على الحجم الصغير ودرجة الحرارة العادية وظروف الضغط المنخفض. مزايا صمام القابس موضحة أدناه:-فتح سريع وإغلاق الصمام- مقاومة السوائل الصغيرةخدمة موثوقة ضد التسرب-تتوفر صيانة مضمنة

خمسة آلاف ومائتان واحد
API6D مقلوب ضغط متوازن مشحم صمام التوصيل 150 رطل

مقلوب ضغط متوازن مشحم المكونات صمام 2inch و 150 رطل. تصنيعها وفقا API6D, صمام قادر على الفتحات و خدمات الإنتاج من حقول النفط ، الأسفلت النباتات الآخرين.

صمام التوصيل
1 بوصة Class600 ميزان ضغط مقلوب مشحم سدادة فولاذية مزورة ، تجويف كامل

تفصيل سريع نوع صمام التوصيل بحجم 1 " التصميم 600 رطل بناء النوع المشحم ، النوع المقلوب ، النوع المتوازن بالضغط ، نوع الاتصال FNPT عملية عملية رافعة كود التصميم API6D نهاية الاتصال ASMEB1.20.1 الضغطدرجة الحرارة ASME B16.34.0 اختبارالتفتيش API 598 آمنة النار API 6FA مادة الجسم أ 105 نطاق درجة حرارة ≤80 ℃ طلب الماء والنفط والغاز سمات - أداء ختم موثوق وعزم دوران صغير ؛ - تتحمل كامل - تعبئة منخفضة الانبعاثات ؛ - تصميم آمن للحريق. - جهاز قفل اختياري رسم تقنى _ رسم عن طريق الكمبيوتر فحص الأبعاد اختبارات الشهود التعبئة لماذا تختار Dervos كشريك لك؟ خدمة الشباك الواحد هنا في Dervos ، يمكننا أن نقدم لك خدمة محطة واحدة من خلال قائمة منتجاتنا الكاملة ، وهذا يعني أنك لست بحاجة للبحث عن موردين مختلفين لأنواع مختلفة من الصمامات ، وسيوفر هذا بالتأكيد وقتك وطاقتك. كل ما عليك فعله هو اختيار Dervos وسنقدم لك الحلول الكاملة. التسليم في الوقت المحدد تحتفظ Dervos بنسبة عالية من التسليم في الوقت المحدد. لماذا يمكننا تحقيق ذلك؟ يتبع فريق الشراء لدينا الطلب عن كثب. بالإضافة إلى ذلك ، سيقوم موظف المبيعات ومراقبة الجودة لدينا أيضًا بمهمة المراقبة على كل طلب. رقابة صارمة على الجودة جميع أعضاء فريق مراقبة الجودة من ذوي الخبرة والمهنية للغاية. لكل طلب ، سيقومون بفحص المواد الخام ، وعملية التصنيع ، وإجراء اختبار الضغط على الغلاف والختم ، والتحقق من أبعاد الصمام لكل رسم تجميعي. أخيرًا ، سيقومون بفحص اللوحة والتعبئة والتغليف.

صمام سد
سدادة صمام ذاتي التشحيم نوع 1 بوصة 150LB CF3

صمام سدادة 1 بوصة مشحم ذاتيًا أو غير مشحم مصنوع من A315 CF3 وفقًا لمعيار API 599 . وهو يتمتع بأداء متميز في الختم ومقاومة التآكل , نظرًا لمقعد PTFE . بالإضافة إلى , صمام نوع الكم مناسب فقط لدرجة الحرارة العادية التي تصل إلى 120 درجة . تفاصيل سريعة اكتب صمام سد بحجم 1 ' ' ضغط التصميم 150 رطل اعمال بناء نوع التشحيم الذاتي , نوع الأكمام , مقعد ناعم الإتصال شفة عملية عملية رافعة كود التصميم API 599 وجها لوجه asme b16 . 10 نهاية الاتصال asme b16 . 5 الاختبار والتفتيش API 598 مادة الجسم a351 cf3 نطاق درجة حرارة -29 درجة مئوية ~ + 120 درجة مئوية تطبيق الماء , النفط , الغاز فحص البعد الاختبار الهيدروستاتيكي

صمام سد
API 6D صمام سد مقلوب LCB 8 بوصة 600 رطل علبة التروس

تم تصميم صمام القابس مقاس 8 بوصات لكل API 6D مع تشغيل شفة RF من الفئة 150 وعلبة التروس . صمام القابس المقلوب مصنوع من lcb . يمكن أن تقدم dervos خدمة التخصيص من خلال تزويد العملاء بصمامات بأحجام مختلفة , المواد , المعايير , ضغط التصميم , الهيكل , نوع العملية ونوع التوصيل . تفاصيل سريعة اكتب صمام سد بحجم 8 ' ' ضغط التصميم 600 رطل اعمال بناء نوع مقلوب , نوع مشحم , ضغط متوازن الإتصال rf شفة عملية ناقل الحركة كود التصميم api 6d وجها لوجه ansi b16 . 10 نهاية الاتصال ansi b16 . 5 الاختبار والتفتيش API 598 مادة الجسم لب نطاق درجة حرارة -46 درجة مئوية ~ + 425 درجة مئوية تطبيق الماء , النفط والغاز البعد

صمام التوصيل
1 "600LB ميزان الضغط المقلوب مشحم التوصيل صمام API 6D

تم تصنيع صمام السدادة 1 "600LB وفقًا لمعيار API 6D. جسم الصمام مصنوع من A105. يتميز بالخصائص الهيكلية لمحكم الغلق بالزيت وتجويفه الكامل. وضع الاتصال هو FNPT. وله مقبض (مع جهاز قفل) وضع التشغيل .

ويجب تشغيلها صمام الكرة الأرضية
8 بوصة 300LB يلقي الصلب A350 صمام الكرة الأرضية BS1873 BW

المدلى بها الصلب صمام الكرة الأرضية يتم تصميمها حسب BS1873. مع غطاء محرك السيارة, خارج المسمار ونير, عقارب, 8 بوصة صمام, صمام مناسبة العمل المشترك الشرط.

خمسة آلاف ومائتان واحد
مشفه صمام الكرة الطرفية ، ASTM A350 LF6 ، CL600 ، 1 / 2 بوصة ، قطعتين

china ذات حواف منتج الصمام الكروي الطرفي ، تقدم Dervos بشفة صمام الكرة الطرفية ، ASTM A350 LF6 ، فئة 600 ، 1 / 2 بوصة ، قطعتان ، تزوير ، API 608 ، BS 5351 ، ASME B16.34.

الثلاثي صمام فراشة تعويض المصنعين
الثلاثي صمام فراشة غريب الأطوار 30 بوصة 150 رطل WCB ذات حواف

يحتوي صمام الفراشة اللامركزي على تصميم إزاحة ثلاثي. لديها أداء مانع للتسرب ممتاز وعمر خدمة أطول بسبب تآكلها الصغير على وجه الختم أثناء تشغيل الصمام. تم تصميم صمام الفراشة مقاس 30 بوصة مع وصلة ansi 150 ذات حواف مزدوجة ومقعد معدني بالكامل. تفاصيل سريعة نوع فراشة   صمام بحجم 30   بوصة ضغط التصميم ansi   150 اعمال بناء ثلاثي   تعويض / غريب الأطوار الثلاثي نوع الاتصال الترددات اللاسلكية   نوع شفة مزدوجة عملية ناقل الحركة   عملية كود التصميم واجهة برمجة تطبيقات   609 وجها لوجه Asmeb16.10 نهاية الاتصال Asmeb16.5 اختبار & أمبير ؛   تفتيش واجهة برمجة تطبيقات   598 مواد الجسم أ 216   WCB نطاق درجة حرارة -29 ℃ ~ + 427 ℃ تطبيق ماء،   النفط والغاز مجموعة المنتجات المتاحة الحجم المعياري: 2 بوصة ~ 150 بوصة ضغط التصميم: 150 رطل ~ 900 رطل اتصال الصمام: شفة ، العروة ، رقاقة ، لحام بعقب (وزن الجسم) تشغيل الصمام: رافعة / وجع ، علبة تروس ، آلية ، تعمل بالهواء المضغوط مواد الجسم: الكربون الصلب wcb ، الفولاذ المقاوم للصدأ cf8 / cf8m / cf3 / cf3m ، الفولاذ المقاوم للحرارة المنخفضة lcb / lcc مادة المقعد: مقعد معدني بالكامل ، مقعد ss + جرافيت

صمام البوابة
4 "150LB بوابة صمام API603 المصبوب الصلب HW-OP OS & Y CF8M

تم تصنيع صمام البوابة مقاس 4 بوصات 150LB وفقًا لمعيار API 603. جسم الصمام مصنوع من ASTM A351 CF8M + STL. وله الخصائص الهيكلية لغطاء الترباس والإسفين المرن والساق الصاعد. يتوافق اختباره وفحصه مع API 598 ، و وضع التشغيل الخاص به هو تشغيل عجلة اليد.

صمام الكرة
3 / 4 بوصة ANSI فئة 150 صمام الكرة العائمة الفولاذ المقاوم للصدأ

مصنوعة من لكل API6D، جهاز الكمبيوتر صمام الكرة العائمة، 3 / 4inch و 150 رطل، لديه مختلف Ends.find صمام الكرة العائمة أو صمامات أخرى بسهولة في Dervos.

صمام العالم
6 "300LB المصبوب الصلب غلوب صمام BB BW WCB API598

تم تصنيع صمام الكرة الأرضية 6 "300LB وفقًا لمعيار BS1873. جسم الصمام مصنوع من WCB. له الخصائص الهيكلية من خلال مستقيم ، غطاء الترباس ، قرص مكافئ ، تدفق قياسي ، مقعد صمام الجسم. وضع الاتصال هو BW. وهو لديه وضع تشغيل عجلة اليد.

اترك رسالة

    إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

الصفحة الرئيسية

منتجات

حول

اتصل