العربية

العربية

Get a Quote
منتجات

منتوجات جديدة

أخبار الشركة

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
2023-05-31

يعتقد الكثير من الناس أن كلاً من صمامات البوابة وصمامات الكرة الأرضية لها وظيفة قطع الوسائط ، لذلك لا تختلف عند استخدامها. في الواقع ، هناك اختلافات معينة بين صمامات البوابة وصمامات الكرة الأرضية في التطبيقات العملية. Gate Valve and Structural Diagram Globe Valve and Structural Diagram 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and

تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
2023-05-24

صمام الفراشة ذو الختم الصلب الثلاثي اللامركزي ، كصمام عالي الأداء ، له مزايا مثل مقاومة التآكل ، الختم الموثوق به ، وعزم الدوران الصغير للفتح. سطحه المحكم هو سطح مخروطي مائل ، والاتصال بين حلقة إحكام إغلاق جسم الصمام وحلقة إحكام تجميع لوحة الفراشة هي ملامسة السطح. مبدأ عملها هو قيادة مجموعة لوحة الفراشة مباشرة عن طريق عزم دوران جهاز القيادة ، مما يتسبب في اتصال حلقة الختم الخاصة بمجموعة لوحة الفراشة بشكل كامل بحلقة إحكام إغلاق جسم الصمام وتوليد تشوه مرن للختم. الخصائص الهيكلية 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

صمام فراشة متحد المركز من الحديد الزهر مبطن ptfe
加载中...

ptfe مبطن شفة صمام فراشة 14 بوصة علبة التروس

  • دفع:

    30% T/T When Order, 70% T/T Before Shipment
  • أصل المنتج:

    China
  • اللون:

    Customization
  • ميناء الشحن:

    Shanghai China
  • المهلة:

    30~55 days Ex Works After Order Confirmation
  • Material:

    Ductile Iron Butterfly Valve
  • Method of Operation:

    Manual Butterfly Valve, Gearbox Operation Butterfly Valve
الاستفسار الآن
تفاصيل المنتج
صمام فراشة ptfe مبطن بالكامل مصنوع من جسم من الحديد الزهر ومع تشغيل علبة التروس. الصمام ذو شفة 14 بوصة له هيكل من نوع متحد المركز.


تفاصيل سريعة

نوع

فراشة   صمام

بحجم

14 "

ضغط التصميم

150 رطل

اعمال بناء

متحدة المركز   نوع ، واصطف ptfe

نوع الاتصال

مزدوج   ذات حواف

عملية

هيأ   تعمل

كود التصميم

واجهة برمجة تطبيقات   609

وجها لوجه

Asmeb16.10

نهاية الاتصال

Asmeb16.5

اختبار & أمبير ؛   تفتيش

واجهة برمجة تطبيقات   598

مواد الجسم

المصبوب   حديد ggg40

نطاق درجة حرارة

-15 ℃ ~ + 150 ℃

تطبيق

ماء،   النفط والغاز


المعرفة ذات الصلة
ما هي ميزة صمام الفراشة المبطن بالكامل؟


الميزة الرئيسية لصمام الفراشة المبطن هو أنه يمكنه التعامل مع الكشط والتآكل بتكلفة أقل نسبيًا.


يوفر المقعد المرن ptfe أو pfa أداء منع التسرب صفر.


بالإضافة إلى ذلك ، فإن مادة ptfe المبطنة لديها مقاومة قوية للتآكل ، أداء مستقر ، معامل احتكاك منخفض ، مما يجعل صمام الفراشة المبطن لديه عمر خدمة طويل.

Double Flanged Butterfly Valve Manufacturers


كيف تتحكم شركة Dervos في جودة المواد الخام؟
تلعب المواد الخام دورًا مهمًا في جودة المنتج. وبالمثل ، يؤثر الصب والتزوير على جودة الصمامات كثيرًا. هذا هو السبب في أن Dervos يولي الكثير من الاهتمام للمسابك. لدينا قائمة الموافقة على المسابك وتصنيفها حسب الشهادات والحجم والمعالجة والمواد. لتلبية متطلبات مختلفة من العملاء ، يمكننا حتى تعيين المسابك المناسبة لعملائنا.

Dervos Approval List of Industrial Valve Foundries


اترك رسالة

إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

منتجات ذات صله
خمسة آلاف ومائتان واحد
API609 PFA عروة صمام فراشة مبطنة FF 20 "150 رطل

هذا صمام فراشة مقاس 20 بوصة من النوع المبطن بالبلاستيك واحد. لها PFA قرص مبطّن و PTFE حلقة المقعد تمكنها من أداء مقاومة ممتازة للتآكل مع علبة تروس ، من السهل القيادة.

صمام فراشة
20 "150LB اصطف فراشة صمام API 609 Lug ASME

20 "صمام الفراشة 150LB مصنوع وفقًا لمعيار API 609. جسم الصمام مصنوع من WCB وضع الاتصال هو Lug وله وضع تشغيل التوربينات.

صمام فحص الرقاقة
API594 8 "300LB صمام فحص بسكويت الويفر المزدوج A995 4A

تم تصنيع صمام فحص بسكويت الويفر 8 "300LB وفقًا لمعيار API 594. جسم الصمام مصنوع من A995 4A ، ويتميز بالخصائص الهيكلية للنوع المدمج واللوحة المزدوجة ، ووضع التوصيل هو Wafer RF.

مزدوج نوع شفة صمام تأرجح نوع
نوع التأرجح صمام عدم الرجوع dn150 pn40 rf flange 1.0619

صمام الاختيار من نوع التأرجح ، المصمم بشفة pn40 rf ، غطاء مثبت ، مصنوع من الفولاذ المصبوب 1.0619 ومادة ss316. يمكن تصنيع صمام الاختيار الكامل لكل طلبات العميل الخاصة. تفاصيل سريعة نوع عدم   صمام الرجوع (فحص الصمام) الحجم الاسمي د   150 الضغط الاسمي ص   40 اعمال بناء ب ،   قرص نوع التأرجح ، دبوس خارجي الإتصال رفع   شفة الوجه تصميم & أمبير ؛ صناعة الدين   3356 من النهاية إلى النهاية en   558 الإتصال en   1092 اختبار & أمبير ؛   تفتيش en   12266 مواد الجسم GS-C25   (1.0619) تطبيق -29 ℃ ~ + 425 ℃ وسائل الإعلام w.o.g. مواد لا جزء اسم كربون   الصلب ل astm أشابة   الصلب ل astm غير القابل للصدأ   الصلب ل astm WCB lcb wc6 wc9 ج 5 راجع 8 CF 8M راجع 3 CF3M 1 الجسم a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 2 حلقة مقعد أ 105 A350 lf2 a182 f11 a182 f22 a182 f5 a182 f304 a182 f316 a182 f304l a182 f316l 3 الجوز القرص a182 f304 a182 f304 a182 f316 a182 f304l a182 f316l 4 غسالة القرص a182 f304 a182 f304 a182 f316 a182 f304l a182 f316l 5 القرص a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 6 مفصل a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 7 دبوس المفصلي a182 f304 a182 f304 a182 f316 a182 f304l a182 f316l 8 نير a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 9 بونيه الجوز أ 194 2 ساعة أ 194 4 أ 194 7 أ 194 8 10 بونيه الترباس أ 193 ب 7 أ 193 l7 أ 193 ب 16 أ 193 ب 8 11 طوقا دوامة الفولاذ المقاوم للصدأ   الجرح الجرافيت أو الفولاذ المقاوم للصدأ دوامة الجرح ptfe 12 التغطية a216 wcb A350 lcb a217 w6 a217 wc9 a217 c5 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 13 ربط المسمار صلب 14 لوحة الاسم الفولاذ المقاوم للصدأ أو الألومنيوم 15 برشام الفولاذ المقاوم للصدأ أو الألومنيوم مواد أخرى (سبيكة 20 ، ansi 321 ، monel hastelloy ، إلخ)   متوفرة عند الطلب س خدمة اور خدمة العملاء الجيدة هي نفس قيمة المنتج نفسه. في dervos ، سوف نقدم مجموعة كاملة من خدمة العملاء لتجعلك تشعر بالراحة عند التعامل معنا. تقديم تقرير الإنتاج الأسبوعي عندما يبدأ الإنتاج ، ستحصل على تقرير الإنتاج أسبوعيًا ، بحيث يمكنك الحصول على أمر جيد لحالة المنتج وإبلاغ عميلك في الوقت الحالي. تقدم ضمان 18 شهرا سيتم تقديم فترة ضمان 18 شهرًا بعد الشحن ، ولا داعي للقلق لشراء صمام من dervos. تقديم الحلول في غضون 3 أيام للشكاوى سيتم حل جميع الشكاوى في غضون 3 أيام ، في هذه الحالة ، يمكنك الرد في الوقت المناسب وحل المشكلات لعميلك ، لتخفيفها حتى عند حدوث الشكاوى.

خمسة آلاف ومائتان واحد
صمام بوابة wcb pn25 dn250 انسحب بونيه rf

تم تصميم صمام البوابة dn250 pn25 وفقًا لـ din 3352. مع أجزاء مشتركة من الصمام ، مثل غطاء المحرك المثبت بمسامير ، ونير خارجي وعجلة يدوية ، جسمها مصنوع من wcb و stl. إن هيكل الصمام وغطاء المحرك والمقعد وأجزاء أخرى يمكن تتبعها.

صمام البوابة
صمام بوابة مانع تسرب الضغط 2 بوصة 4500 رطل SW API 602

تم تصميم صمام البوابة فئة 4500 عالي الضغط مع وصلة نهاية PSB و SW . مصنوعة من CS A105 , ويتبع صمام البوابة مقاس 2 بوصة معيار الفحص API 598 ومعيار التصميم API 602 . يمكن أن تقدم dervos خدمة التخصيص من خلال تزويد العملاء بصمامات بأحجام مختلفة , المواد , المعايير , ضغط التصميم , الهيكل , نوع العملية ونوع التوصيل .

صمام التوصيل
DN250 PN25 سدادة ذات أكمام صمام RF WCB API599 تشغيل التوربينات

تم تصنيع صمام القابس DN250 PN25 وفقًا لمعيار API599. جسم الصمام مصنوع من A216 WCB. لها الخصائص الهيكلية لصمام سد الختم الناعم. وضع الاتصال الخاص به هو RF. ولها وضع تشغيل التوربينات.

مصفاة
يلقي الصلب 6 "150LB سلة مصفاة مرشح أزرق RF WCB ASME B16.34

6 "مصفاة 150LB مصنوعة وفقًا لمعيار ASME B16.34. جسم الصمام مصنوع من ASTM A216 WCB. لها الخصائص الهيكلية لنوع السلة. وضع التوصيل هو RF.

WCB صمام التحكم في العالم
صمام التحكم الكهربائي العالم wcb pn40 dn200 rf

صمام التحكم الكهربائي مصنوع من الفولاذ الكربوني المصمم للتحكم الدقيق في التدفق والتنظيم. لدى شركة Dervos العديد من الموردين لأنواع مختلفة من صمامات التحكم. تفاصيل سريعة نوع كره ارضيه   صمام التحكم بحجم د   200 ضغط التصميم ص   40 نوع الاتصال الترددات اللاسلكية   شفة كود التصميم اسمى   ب 16.34 نهاية الاتصال اسمى   ب 16.5 وجها لوجه اسمى   ب 16.10 اختبار & أمبير ؛ تفتيش واجهة برمجة تطبيقات   598 مواد الجسم أ 216   WCB مواد تقليم غير القابل للصدأ   صلب تطبيق ماء،   النفط والغاز ملف الشركة تأسست في عام 2008 ، شركة dervos valves industry. ltd هي بائع محترف ومصدر ومورد للصمامات الصناعية والأنابيب والتجهيزات. قامت شركة Dervos بتوسيع أعمالها إلى خمس قارات حول العالم ، بما في ذلك أوروبا وأوقيانوسيا وأفريقيا وأمريكا وآسيا. التزامنا هو العثور على أنسب المنتجات لعملائنا بطريقة فعالة. نعتمد المهارات الإدارية الحديثة للتأكد من الكفاءة في نظام الإنتاج والبيع. كيف نتعامل مع الشكاوى عندما تأتي الشكاوى ، كيف نتعامل معها؟ سنقوم بالرد خلال 24 ساعة ونطلب المزيد من الأدلة من العملاء. ثم نناقش مع مراقبة الجودة والمصانع لتحديد السبب. في اليوم الثالث ، سوف نقدم حل للعملاء.

صمامات الكرة الأرضية
WCB 2 بوصة 300LB Globe Valve BB Rising Stem Hand Wheel

تفصيل سريع نوع صمام العالم الحجم الاسمي NPS 2 الضغط الاسمي فئة 300 بناء BB ، جذع صاعد ، مقعد متكامل نوع الاتصال شفة نوع العملية عقارب كود التصميم BS1873 وجها لوجه ASME B16.10.009 نهاية شفة ASME B16.5 اختبارالتفتيش API 598 مادة الجسم WCB + STL مادة تقليم F316 + المحكمة الخاصة بلبنان نطاق درجة حرارة -29 ℃ ~ 425 ℃ متوسط الماء والنفط والغاز أصل الصين ميزة التصميم 1. هيكل الجسم نمط مستقيم 2. OSY ، الجذع الصاعد 3. انسحب بونيه 4. متاح مع عملية الترس المخروطي 5. نوع القابس القرص 6. تآكل قليل على وجه الختم أثناء تشغيل الصمام 7. مساحة تركيب أصغر المطلوبة رسم تقنى _ رسم عن طريق الكمبيوتر فحص الأبعاد اختبارات الشهود التعبئة خدمتنا خدمة عملاء Dervos هي واحدة من أكبر المزايا التنافسية لدينا. في Dervos ، نقدم- 1. الاقتباس في غضون 24 ساعة أو في موعد لا يتجاوز 3 أيام سيتيح لك ذلك الوفاء بالموعد النهائي لتقديم عرض الأسعار وتعزيز كفاءة عملك 2-تقرير الحالة الأسبوعي لطلبك بهذه الطريقة ، سيكون لديك صورة واضحة لطلبك. لا تحتاج إلى إضاعة الوقت في دفعنا لتحديث الحالة 3-فترة الضمان 18 شهرًا سيتم إصدار شهادة ضمان بعد الشحن ولن يكون لديك أي قلق بعد شراء الصمامات. 4. حلول للشكاوى في غضون 3 أيام الإجراءات السريعة والمسؤولة للشكاوى ستحمي سمعتك وتقلل من الخسارة المالية قدر الإمكان. الشهادات يمكن أن تقدم Dervos تقارير حول طلبات العملاء ، مثل ISO 9001 و PED CE و EAC و API 607 ​​و API 6D و API 6A وما إلى ذلك.

صمام البوابة
8 " 1500LB الضغط الذاتي بوابة صمام WCC BW

8 " تم تصنيع صمام البوابة 1500 رطل وفقًا لمعيار ASME B16 . 34 القياسي . جسم الصمام مصنوع من WCC . وله الخصائص الهيكلية للضغط الذاتي الختم , بوابة مرنة وطول بنيوي 711 مم . مبدأ العمل لصمام الختم الذاتي هو استخدام سطح إسفيني مانع للتسرب للختم تحت الضغط .

صمام الكرة
DN150 PN25 المصبوب الصلب العائم الكرة صمام CF8M API RF

تم تصنيع صمام الكرة العائمة DN150 PN25 وفقًا لمعيار ISO 17292. جسم الصمام مصنوع من A351-CF8M. لها الخصائص الهيكلية لقطعتين ، مدخل جانبي ، كرة عائمة ، تجويف كامل ، مضاد للهب ، مضاد للكهرباء الساكنة ، ساق مضاد للانفجار. وضع الاتصال الخاص به هو RF. ولها وضع تشغيل رافعة.

اترك رسالة

    إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

الصفحة الرئيسية

منتجات

حول

اتصل