العربية

العربية

Get a Quote
منتجات

منتوجات جديدة

أخبار الشركة

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
ما هو الفرق بين صمام البوابة وصمام الكرة الأرضية؟
2023-05-31

يعتقد الكثير من الناس أن كلاً من صمامات البوابة وصمامات الكرة الأرضية لها وظيفة قطع الوسائط ، لذلك لا تختلف عند استخدامها. في الواقع ، هناك اختلافات معينة بين صمامات البوابة وصمامات الكرة الأرضية في التطبيقات العملية. Gate Valve and Structural Diagram Globe Valve and Structural Diagram 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and

تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
تكنولوجيا المعالجة والخصائص الهيكلية لصمام الفراشة ذو الختم الصلب الثلاثي غريب الأطوار
2023-05-24

صمام الفراشة ذو الختم الصلب الثلاثي اللامركزي ، كصمام عالي الأداء ، له مزايا مثل مقاومة التآكل ، الختم الموثوق به ، وعزم الدوران الصغير للفتح. سطحه المحكم هو سطح مخروطي مائل ، والاتصال بين حلقة إحكام إغلاق جسم الصمام وحلقة إحكام تجميع لوحة الفراشة هي ملامسة السطح. مبدأ عملها هو قيادة مجموعة لوحة الفراشة مباشرة عن طريق عزم دوران جهاز القيادة ، مما يتسبب في اتصال حلقة الختم الخاصة بمجموعة لوحة الفراشة بشكل كامل بحلقة إحكام إغلاق جسم الصمام وتوليد تشوه مرن للختم. الخصائص الهيكلية 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

صمام فراشة
加载中...

صمام فراشة متحدة المركز DN300 PN10 FF API609


تم تصنيع صمام الفراشة DN300 PN10 وفقًا لمعيار API 609. جسم الصمام مصنوع من GGG40. لها الخصائص الهيكلية للخط المركزي والطول الهيكلي 78 مم. وضع الاتصال الخاص به هو FF. ولها وضع تشغيل التوربينات.


  • دفع:

    30% when order confirmed, 70% before shipment
  • أصل المنتج:

    China
  • اللون:

    Customization
  • ميناء الشحن:

    Shanghai, China
  • المهلة:

    30~60 days Ex Works after order confirmation
  • Material:

    GGG40
  • Method of Operation:

    Turbine Operation
الاستفسار الآن
تفاصيل المنتج

وصف المنتج

يكتب

صمام فراشة

مقاس

DN300

ضغط

PN10

اتصال

FF

عملية

تشغيل التوربينات

مادة الجسم

GGG40

معيار التصميم

API 609

وجها لوجه

EN558-1

نهاية شفة

EN1092 / ANSI B16.5a

أعلى شفة

ISO5211

كود الاختبار والتفتيش

EN12266

درجة حرارة.

≤120 ℃

متوسط ​​قابل للتطبيق

الماء والنفط والغاز

سمات

1. هيكل بسيط وتصنيع مناسب.

2. أداء الختم موثوق به وليس من السهل التآكل ، مما يزيد من عمر خدمة الصمام.

رسم تقنى _ رسم عن طريق الكمبيوتر

فحص البعد

اختبار الضغط

لوحة الاسم والتعبئة

تقرير التفتيش

اترك رسالة

إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

منتجات ذات صله
صمام فراشة متحد المركز من الحديد الزهر
يلقي الحديد رقاقة نوع متحدة المركز فراشة صمام pn10 dn200

يتكون صمام فراشة ذراع متحدة المركز من الحديد الزهر gg25 ، ss420 الجذعية ، ومقعد epdm. صمام فراشة dn200 قابل للتطبيق على الماء. تفاصيل سريعة نوع فراشة   صمام الحجم الاسمي dn200 الضغط الاسمي pn10 بناء متحدة المركز   اكتب ، epdm يجلس لينة نوع الاتصال رقاقة   نوع عملية رافعة   تعمل كود التصميم en   593 وجها لوجه en   558 نهاية الاتصال en   1092 اختبار & أمبير ؛   تفتيش en   12266 مواد الجسم المصبوب   الحديد gg25 نطاق درجة حرارة -15 ℃ ~ + 150 ℃ تطبيق ماء،   النفط والغاز التعديلات المتاحة لصمامات الفراشة -صمام ضغط اسمي -صمام الحجم الاسمي - نوع غريب الأطوار ونوع غريب الأطوار - مقعد ناعم ، مقعد معدني متعدد الطبقات ، مقعد معدني بالكامل -الهيئة & أمبير ؛ تقليم المواد اتصال نهاية (مزدوجة الشفاه ، رقاقة ، العروة) - التشغيل المتوفر (الساق العارية ، المحرك الكهربائي ، المحرك الهوائي ، الرافعة أو المفتاح) طلاء حسب الطلب تغليف حسب الطلب تطبيق المنتج زيت & أمبير ؛ صناعة الغاز تعمل صمامات dervos بشكل كامل في صناعات التكرير والنفط والغاز للتعامل مع بيئات العمل الصعبة للغاية. صناعة بتروكيماوية يمكننا أيضًا توفير جميع أنواع الصمامات في مواد مختلفة ، مثل الفولاذ المقاوم للصدأ ، مونيل ، تيتانيوم ، وهاستلوي لتلبية متطلبات الصناعة الكيميائية. صناعة محطات الطاقة يمكن أن توفر شركة Dervos صمامات مناسبة لاستخدام محطة الطاقة مع متطلبات الضغط العالي ودرجة الحرارة.

خمسة آلاف ومائتان واحد
4 بوصة 150 رطل العروة صمام فراشة متحدة المركز حديد الدكتايل

هذا الفراشة المتركزة الصمام هو صمام من النوع ذي الفتحات الملولبة ويمكن استخدامه للعديد من التطبيقات. ال يمكن استخدام الصمام كسدادة ، وحنفية للتفريغ في نهاية خط الأنابيب ، فتح / إغلاق والتحكم في التدفق

خمسة آلاف ومائتان واحد
يلقي الصلب نوع رقاقة فراشة صمام 2 بوصة 300 رطل رافعة

مزود صمام فراشة نوع رقاقة الصين DVS توريدات صمام فراشة من الصلب المصبوب ، 2 بوصة ، فئة 300 ، ذراع تشغيل للهواء والماء والبخار والغازات.

صمام فراشة
10 "150LB فراشة صمام العروة GGG40 API609 رافعة

تم تصنيع صمام الفراشة 10 "150LB وفقًا لمعيار API 609. جسم الصمام مصنوع من GGG40. له الخصائص الهيكلية لنوع الخط المتوسط ​​ونوع العروة (الفتحة الملولبة). وضع الاتصال الخاص به هو العروة. وله وضع تشغيل الرافعة .

صمام التحكم
6 "1500LB Throttle Valve RTJ Connection Body LF2 API598

تم تصنيع صمام الخانق 6 "1500LB وفقًا لمعيار ASME B16.34. جسم الصمام مصنوع من LF2. يتميز بالخصائص الهيكلية للزاوية ، التدفق الكامل وغطاء الجسم المثبت بمسامير. وضع التوصيل هو RTJ. ولديه تشغيل عجلة اليد وضع.

الخوار صمام الكرة الأرضية الختم pn40
يلقي الصلب الخوار ختم الكرة صمام dn65 pn40 1.0619

تم تصميم صمام الكرة الأرضية الختم dervos وفقًا لـ en13709 مع dimesnsion وجهاً لوجه لكل en558. يضمن الختم المصمم خصيصًا عدم التسرب من الجذع. تفاصيل سريعة نوع كره ارضيه   صمام الحجم المعياري د   65 الضغط المعياري ص 40 اعمال بناء انسحب   بونيه ، جذع صاعد ، خوار مختوم نوع الاتصال الترددات اللاسلكية   شفة عملية عقارب كود التصميم en13709 وجها لوجه en   558 الإتصال en1092 اختبار & أمبير ؛   تفتيش en 12266 مواد الجسم كربون   الفولاذ 1.0619 خوار المواد SS304 ، SS316 ، SS316L وغيرها تطبيق -29 ℃ ~ + 420 ℃ تطبيق ماء،   النفط والغاز ميزة الهيكل 1. التصميم القياسي لختم الخوار مزدوج الجدار 2. تصميم غطاء المحرك تبديد الحرارة ؛ 3. مع جهاز تخزين زيوت التشحيم 4 ، مع تصميم بحلقة إحكام لتثبيت الجوز الجذعي ؛ 5. هيكل منتج معقول ، أداء ختم موثوق به ومظهر جيد ؛ 6. ال سطح الختم ملحوم بسبيكة صلبة مشتركة ، والتي لها تآكل جيد المقاومة ، مقاومة التآكل ، أداء مضاد للاحتكاك والخدمة الطويلة الحياة؛ 7. الجذع لديه علاج النترة بمقاومة جيدة للتآكل ومضاد للاحتكاك أداء؛ 8. مع مؤشر الموقف لحركة الجذع.

خمسة آلاف ومائتان واحد
انخفاض صمام بوابة مخفضة، بونيه ملحومة، وتركيب

الصين الملحومة بوابة بوابة بوابة منتج مصنوع من نسيج بوابة الصلب مزورة تتحمل، A105N، 1 / 2-4 بوصة، 150-1500 LB، بونيه الملحومة، لا يتجزأ

صمام فراشة غريب الأطوار مزدوج
إزاحة مزدوجة صمام فراشة الحديد الزهر en593 pn10 dn500

ينتمي صمام فراشة الحديد الزهر إلى نوع الإزاحة المزدوجة. تمتلك جسمًا مدمجًا ، وقيمة عزم دوران منخفضة ، ووظيفة مانعة للتسرب مثالية ، مناسبة لاستخدام المياه مع نطاق درجة حرارة عادي. تفاصيل سريعة نوع صمام فراشة الحجم الاسمي dn500 الضغط الاسمي pn10 بناء تعويض مزدوج ، يجلس لينة نوع الاتصال نوع شفة عملية تعمل معدات كود التصميم en 593 وجها لوجه en 558 نهاية الاتصال en 1092 اختبار & أمبير ؛ تفتيش en 12266 مواد الجسم الحديد الزهر ggg50 نطاق درجة حرارة -15 ℃ ~ + 150 ℃ تطبيق الماء والنفط والغاز فحص البعد & أمبير ؛ اختبار الضغط العلامة & أمبير ؛ التعبئة

صمام الكرة
DN40 PN40 صمام الكرة العائمة F316L RF ليفر DIN

تم تصنيع صمام الكرة العائمة DN40 PN40 وفقًا لمعيار EN 13709. جسم الصمام مصنوع من A182 F316L. لها الخصائص الهيكلية للكرة العائمة. وضع الاتصال الخاص به هو RF. ولها وضع تشغيل رافعة.

صمام فحص العروة مزدوج القرص 150 رطل
ss دوبلكس تحقق صمام نوع العروة لوحة مزدوجة 8 بوصة فئة 150

صمام 8 بوصة 150 رطل مزدوج القرص عدم الرجوع ، مصمم لكل واجهة برمجة تطبيقات 594 ، لديه لوحة مزدوجة ووصلة العروة. يتكون صمام الاختيار المزدوج بدون لوحة من الفولاذ المقاوم للصدأ المزدوجة 4a كجسمه ومواده. تفاصيل سريعة نوع التحقق من   صمام بحجم 8 " ضغط التصميم صف دراسي   150 اعمال بناء مزدوج   نوع اللوحة ، بدون حافظة الإتصال نوع العروة تصميم & أمبير ؛ صناعة واجهة برمجة تطبيقات   594 من النهاية إلى النهاية اسمى   ب 16.10 الإتصال اسمى   ب 16.5 الضغط & أمبير ؛   مؤقت اسمى   ب 16.34 اختبار & أمبير ؛   تفتيش واجهة برمجة تطبيقات   598 مواد الجسم الازدواج   الفولاذ المقاوم للصدأ 4a تقليم المواد الازدواج   الفولاذ المقاوم للصدأ وسائل الإعلام w.o.g. ميزة التصميم 1. البؤرة وجها لوجه 2. صغيرة الحجم وخفيفة الوزن 3.قريب من القرص مع مطرقة المياه الصغيرة 4. مثبتة عموديا أو أفقيا 5. ممر تدفق سلس مع مقاومة تدفق صغيرة 6. دورة حياة طويلة وموثوقية عالية

4 بوصة صمام بوابة
يلقي الصلب 600LB 4 بوصة بوابة صمام تمديد بونيه BW

صمام البوابة ، المصنوع وفقًا لـ API 600 ، مصنوع من CF8 ، وهو نوع واحد من الفولاذ المصبوب. تم تجهيز الصمام مقاس 4 بوصات بعجلة يدوية ونير خارجي وغطاء محرك مثبت بمسامير وغطاء محرك ممتد. جميع الملحقات يمكن تتبعها.

خمسة آلاف ومائتان واحد
الكربون الصلب رفع الربيع تحميل صمام صمام RF DN50 PN40

هذا صمام الاختيار المحملة في الربيع، المصنوع وفقا ل DIN3840، لا يتطلب ضغط خطورة أو اتجاه استراحا للعمل أو مادة الجسم 1.0619 تمكين الصمام للعمل تحت حرارة كبيرة و إنه الربيع يمكن أن يستوعب مجموعة واسعة من درجة الحرارة، أيضا.

اترك رسالة

    إذا كنت مهتما في منتجاتنا و تريد أن تعرف المزيد من التفاصيل,يرجى ترك رسالة هنا وسوف نقوم بالرد عليك بأسرع ما يمكن.

الصفحة الرئيسية

منتجات

حول

اتصل